Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Neptune Beach
Gate repair in Neptune Beach runs $180 to $340 for most hinge, latch, and alignment work, and $450 to $900 when a motor or control board needs replacing. That is the range we quote before we touch a single bolt, and it is a written price that does not move at the door. If your gate is sagging, stuck open, or dead after a storm, call (904) 490-8559 and a live person answers, day or night. We know Neptune Beach gates because we work on them every week, from the ranch homes near Jarboe Park to the bungalows off Florida Boulevard.
Why Carver Gate Repair Jacksonville Is Neptune Beach’s Preferred Gate Repair Company
Neptune Beach homeowners do not have time for a repair crew that treats their gate like an afterthought. Our technicians are background-checked, uniformed, and trained exclusively on gate systems, not general contracting. When we arrive, we carry parts for the brands already installed on most Neptune Beach properties: FAAC, BFT, LiftMaster, and Ghost Controls among them. That means fewer return trips and a repair that holds.
Every job we do in Neptune Beach carries the 365-Day Done Right Promise. The guarantee is in writing and covers the repair for a full year from the date of service. If the same failure happens again inside that window, we come back and fix it at no charge. No argument, no re-quote. That is The Garrison Standard, and it has been how this company has operated since 2008. Lonnie Burke runs our Jacksonville operation to that same standard, and the crew dispatches to Neptune Beach with it on every ticket.
Phones are answered by a live person 24 hours a day, seven days a week, including weekends and holidays. When a gate fails on a Friday evening before a beach weekend, you reach a dispatcher, not voicemail.
Styles & brands we work with
Wrought Iron Gate Repair in Neptune Beach
Wrought Iron Gate Repair is the most common call we take in Neptune Beach, and for good reason. The salt air here attacks iron faster than almost any climate in northeast Florida. A standard wrought iron gate on a beach bungalow off 3rd Street will show rust at the hinge welds within a few seasons, and the lower rail where sand and salt spray collect often pinholes through entirely. A typical wrought iron repair in Neptune Beach, whether it is a cracked weld, a seized hinge, or a rusted-through bottom rail, runs $200 to $400 depending on how much fabrication is needed.
Welding and Rust Section Repair
We cut out rusted sections and weld in new stock, then coat the repair so it matches the existing gate. On gates near the ocean, we recommend upgrading to 316 stainless hinge pins while we have the gate off. Zinc-plated pins seize solid in this salt air within two years, and then the gate has to be cut off its post to be removed.
Ornamental Gate Straightening
Years of wind and rust weaken the frame, and a wrought iron gate will start to sag toward the latch side. We re-square the frame, reinforce the weak joints, and reset the hinges so the latch catches cleanly again. Most straightening jobs in Neptune Beach run $250 to $350.
Metal Gate Repair in Neptune Beach
Metal Gate Repair in Neptune Beach covers the tube-steel, chain-link, and aluminum pedestrian gates found on the mid-century ranch and bungalow lots that make up most of this city. The original gates on many of these homes date to the 1960s and 1970s, and salt exposure has done its work. Common fixes include replacing rusted hinge brackets, cutting out corroded post sections, and rebuilding latch assemblies. A standard metal gate repair here runs $180 to $320, with post replacement adding another $150 to $250 when the post itself has rotted at the base.
Chain-Link and Tube-Steel Gate Rebuilds
We rebuild the frame, replace the mesh or pickets where they have pulled free, and set new hinges. On older Neptune Beach properties, post spacing is often non-standard, so we fabricate retrofit brackets on site rather than forcing a stock part that will not seat right.
Post Replacement and Concrete Reset
Salt air and storm-driven rain eat concrete and steel alike. When a gate post is loose or rusted at grade, we dig it out, set a new galvanized or stainless post, and rehang the gate. The price is quoted and agreed before we start digging.
Trusted Brands We Service in Neptune Beach
We work on the systems Neptune Beach homeowners actually have. That includes FAAC articulating arm operators on driveway swing gates, BFT hydraulic units on heavier iron gates, Linear slide operators, and Viking swing arms. We keep common control boards, limit switches, and remotes stocked for these brands, so a repair that would take a week to order parts for from a generalist is often done same day. For garage and gate motors, our Gate Repair team carries the right boards and arms for the job, not a generic substitute.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Neptune Beach Homes
- Salt-seized hinge pins. Ocean air seizes standard zinc-plated pins solid within two years. The gate will not swing, and the fix requires cutting the old pin out and fitting a 316 stainless replacement.
- Lightning-fried control boards. Summer storms roll in off the Atlantic and hit low-lying, unshielded gate installations hard. We replace burned boards and add surge protection so the next strike does not take out the new one.
- Sand-abraded rollers and gears. Onshore breeze carries sand that works its way into slide gate tracks and rack gears. Gates grind, jam, or stall, especially on long driveway runs near the beach.
- Rusted-through lower rails on iron gates. Salt spray settles on the bottom rail and pickets. The frame holds, but the bottom sections pinhole and sag. We cut and weld new sections while the gate is still serviceable.
We recently serviced a swing gate on a 1970s ranch in the Oceanwood neighborhood where the galvanized hinge pin had seized solid from salt air. Our tech cut off the old pin and rebuilt the hinge post with a 316 stainless assembly, then retrofitted a Ghost Controls operator to the original chain-link frame that had been sagging from decades of rust. That is the kind of repair a general handyman service misses, because it takes a gate specialist to see the failure pattern before it strands a gate in the closed position.
Pricing for Gate Repair in Neptune Beach, FL
Gate repair in Neptune Beach typically costs $180 to $340 for hinge, latch, alignment, and weld work. Motor and control board replacement runs $450 to $900 depending on the operator brand and whether we are replacing an arm, a board, or the full unit. Post replacement with concrete reset adds $150 to $250 when the post itself has failed. Salt-air corrosion, older non-standard gate frames, and the need for stainless hardware can push a repair toward the top of the range. You will know the number before any work begins, in writing. Call (904) 490-8559 for a free estimate, and the price we quote is the price you pay.
We Also Serve Cities Near Neptune Beach
Our Jacksonville crews cover the Beaches corridor and the surrounding metro. If you are in Jacksonville Beach, Atlantic Beach, Ponte Vedra Beach, or Jacksonville proper, we dispatch to those addresses with the same written-price policy and one-year guarantee. This page covers Gate Repair in Neptune Beach specifically; nearby residents can call the same number for the same service.
Serving Neptune Beach, FL - Our Local Coverage Area
We’re based in the Neptune Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Neptune Beach
Neptune Beach is only 2.7 square miles, and nearly every gate sits within a block of salt air blowing in off the Atlantic. That airborne salt lands on hinge pins and welds daily, and standard zinc-plated hardware corrodes to the point of seizure within two years. Inland Jacksonville addresses a few miles west do not face anything close to that exposure. The fix is 316 stainless hinge hardware, which we stock and install on nearly every Neptune Beach repair. Call (904) 490-8559 and have your hinges checked before they lock up entirely.
Most Neptune Beach driveways are short enough that a wired or standard battery-backup operator is the better choice, but solar is an option for gates where running conduit is impractical, such as detached rear access or beachside pedestrian gates. The concern here is not just power; it is sand. Sand blows into the rack and pinion on solar slide openers, and if the panels are not kept clean, the system undercharges and leaves the gate stuck. Solar works in Neptune Beach when installed with sealed hardware and regular maintenance. Call the number above for a site assessment and a written quote.
Yes, in most cases. A sagging wrought iron gate is usually a frame problem, not a panel problem. We re-square the frame, reinforce weakened joints with new welds, and replace worn hinges with stainless parts. The pickets and ornamental elements can typically be saved. Full panel replacement is only necessary when the bottom rail and a majority of the pickets have rusted through. Repairs of this type in Neptune Beach run $250 to $400.
Block the beam with your hand while the gate is closing. If the gate does not stop and reverse within a second or two, the photocell is not functioning. Another sign is a keypad or opener that flashes a fault code after every cycle. Photocells near the ocean fail more often because salt film builds up on the lens and scatters the beam. Clean the lens, and if the problem persists, the sensor or the wiring at the operator board is likely failing. A replacement sensor and wiring check in Neptune Beach runs $150 to $250.
Lightning strikes near the ocean send surges through the low-voltage wiring that connects the keypad to the operator board. The strike does not have to hit the gate directly; a nearby hit on a power line or beachside transformer is enough. The surge fries the keypad’s circuit or the operator’s control board input. We replace the damaged component and install a surge suppressor on the low-voltage line so the next storm does not do the same. For an exact repair quote in Neptune Beach, call (904) 490-8559.
Written by Lonnie Burke, Owner at Carver Gate Repair Jacksonville, serving Neptune Beach and the Beaches corridor with The Garrison Standard since 2008.