Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterAutomatic Gate Repair in Jacksonville, FL
Automatic gate repair in Jacksonville typically costs $185 to $650 depending on the fault, with motor replacement running $700 to $1,800 installed on most residential systems. Most problems fall into three buckets: a gate that won’t open, a gate that won’t stop, or a gate that opens when it shouldn’t. Carver Gate Repair Jacksonville offers Electric Gate Repair for swing and slide gate operators, limit switches, loop detectors, remote receivers, and the heavy hardware that moves the gate itself.
We’re the gate repair company under the Garrison Partners family, operating to The Garrison Standard since 2008. That means a written price before any work starts, a written guarantee on every repair, and a live person on the phone at (904) 490-8559 when the gate quits at 6:30 on a Friday. If your gate has stopped responding or started acting erratically, start with our Gate Repair overview, then call us for a straight answer on your specific system.
Key Takeaways
- Most automatic gate repairs in Jacksonville are completed same-day when parts are on the truck.
- Every repair includes a written guarantee, good for a full year from the date of service.
- Written price before work begins. The number does not move at the door.
- Background-checked, uniformed technicians on every call. You’ll know who’s walking onto your property.
- Phones answered by a live person around the clock. Call (904) 490-8559 now and a real human answers.
When You Need Automatic Gate Repair
Automatic gates fail on a predictable set of failure points. Jacksonville’s humidity accelerates corrosion on circuit boards and limit switches, and the daily afternoon thunderstorms put water where the manufacturer never intended it. Here’s what a gate actually does when it needs work:
- The gate opens halfway and reverses. This is almost always a limit switch or obstruction sensor fault. In Jacksonville’s salt-air corridors near Atlantic Beach and Mayport, we see corroded limit switch terminals cause this on gates as young as four years old.
- The gate starts opening on its own at random hours. A failing loop detector often interprets rainwater as a vehicle sitting on the exit loop. Homes along the St. Johns River and Ortega report this most during wet season.
- The motor runs but the gate doesn’t move. That’s typically the drive chain, belt, or a stripped gear inside the operator. BFT and FAAC swing operators on older Mandarin and San Marco homes commonly show this after eight to ten years.
- The remote worked yesterday and doesn’t today. Before you change batteries, know this: receiver boards fail more often than remotes in North Florida’s humid months. We bench-test the receiver in the driveway and tell you which one it is.
- The gate slams shut or creeps open. Worn hydraulic fluid or a failing internal bypass valve on linear and Viking swing operators causes this. It’s a safety issue, not a noise issue – a gate that creeps open defeats the security you installed it for.
- The keypad and intercom system stopped talking to the operator. Wiring at the gate column takes direct sun and rain exposure. We trace the circuit from the keypad to the control board and find the break, usually at the hinge point where the conduit flexes.
None of these are the kind of failure you want to guess at. The control boards on modern gate operators are not forgiving of incorrect wiring, and the high-tension springs on some swing gate systems hold enough stored force to cause serious injury. If your gate is doing any of the above, call (904) 490-8559 and we’ll diagnose it properly.
Our Automatic Gate Repair Process
Every job runs the same way, whether it’s a simple limit switch adjustment in Riverside or a full operator rebuild in Nocatee. Here’s the process, written out plainly:
- Call (904) 490-8559. A live person answers, 24 hours a day, 7 days a week. No recorded menu. You tell us what the gate is doing, what brand the operator is, and when you need it looked at. We schedule an arrival window that fits your day, not ours.
- Your technician arrives on time, in uniform, with a badge. Every Carver Gate Repair Jacksonville technician passes a background check before they’re dispatched. You’ll know who is on your property before they step out of the truck.
- System diagnostic at the gate. The technician tests the operator, limit switches, loop detector, remote receiver, and the physical gate hardware – hinges, chain, belt, or hydraulic fluid – whatever your system uses. You get a plain-language explanation of what failed and why.
- Written price before any work starts. Not an estimate over the phone. Not a range that grows once the cover is off. The written price covers parts and labor, and it’s in your hand before a single tool touches the gate. If you decline the work, there’s no pressure and no charge for the visit.
- Repair, test, and verify. We fix it, cycle the gate repeatedly, test every remote, every keypad code, and both loop detectors. We run the obstruction sensor tests and confirm the auto-close timer is set correctly for your driveway length.
- Written guarantee before we leave. Every repair carries a written guarantee, good for a full year from the date of service. If the repair fails inside that year, the second visit is free. No charge, no argument. That’s The Garrison Code.
Automatic Gate Repair Pricing in Jacksonville
Gate repair pricing is honest when the shop tells you the range before they arrive. Here’s what Jacksonville homeowners typically pay, based on the systems we see across Duval, St. Johns, and Clay counties:
| Repair Type | Typical Range | What’s Included |
|---|---|---|
| Limit switch replacement or adjustment | $185 – $340 | Switch, labor, full system test |
| Loop detector replacement | $275 – $495 | New detector, programming, sensor verification |
| Remote receiver board replacement | $250 – $450 | Board, reprogramming of all existing remotes |
| Drive belt or chain replacement | $320 – $650 | Belt or chain, sprocket inspection, tension adjustment |
| Swing operator motor replacement | $700 – $1,200 | Motor, installation, calibration, guarantee |
| Full operator replacement (slide gate) | $900 – $1,800 | Operator, removal of old unit, wiring, programming, guarantee |
What changes the price? The brand of operator matters. A FAAC or BFT hydraulic swing operator tends to cost more for parts than a linear actuator unit. Age matters too – older Viking and Linear units sometimes require a retrofit bracket, Gate Realignment, or wiring upgrade to accept a new board. Proximity to salt air accelerates corrosion, which occasionally means replacing a wiring harness instead of just a connector.
Every job gets a written price before we start. Not a verbal range, not a handshake number. Written. If the repair requires a part we don’t carry, we’ll tell you the full price of the part and the labor before we order anything. Estimate at the door is always free.
Brands We Work On Every Week
Our technicians are trained on nine gate-motor brands, so the knowledge matches the equipment already in your driveway. The systems we see most often in Jacksonville are FAAC on the older estate homes along the river, Linear on mid-2000s suburban swing gates in Baymeadows and Deerwood, and BFT and Viking on newer slide gate installations in Nocatee and Bartram Park.
We don’t play the “we’ll figure it out when we get there” game either. A technician showing up to diagnose a FAAC without having touched one before is wasting your afternoon. Our techs work on these brands every week.
The Garrison Standard and Why It Exists
Gate repair has a reputation problem, and it’s earned. Technicians who don’t show. Prices that move after the cover comes off. Repairs that fail in six months with no recourse. Homeowners in Jacksonville have been burned enough that they approach any trade with suspicion – and rightly so.
The Garrison Standard exists as a written answer to that. It’s not a slogan. It’s the operating code every location under the Garrison Partners family follows, and it has been in effect since 2008. The parts that matter to you:
- 365-Day Done Right Promise. The guarantee is in writing on every repair, covering a full year from the date of service.
- Written price before any work starts. You sign off on a number. That number does not move.
- Free second visit if the repair fails within the guarantee window. No charge, no argument, no fine print.
- Background-checked, uniformed technicians on every job. You’ll know who is on your property.
- Live-person phone coverage 24 hours a day, 7 days a week. Weekends, holidays, 11 PM. A human answers.
Lonnie Burke leads Carver Gate Repair Jacksonville under this standard. Same rules, same written guarantees, same clean trucks. Our full Gate Repair in Jacksonville page covers everything we do beyond automatic gate systems – hinges, locks, panels, and manual gate rebuilds.
FAQs – Automatic Gate Repair
How much does automatic gate repair cost in Jacksonville?
Automatic gate repair in Jacksonville typically costs between $185 and $650 for most component-level repairs, with full operator replacement running $700 to $1,800 on residential systems. The price depends on your operator brand, the age of the unit, and whether the fault is electrical or mechanical. Call (904) 490-8559 for a free diagnostic visit and a written price before any work begins.
Can you repair my automatic gate the same day?
Yes, in most cases we repair automatic gates the same day in Jacksonville. Our trucks carry limit switches, loop detectors, receiver boards, remotes, belts, and chains for the brands we service most – FAAC, Linear, BFT, and Viking among them. If your gate is stuck open or won’t close, call (904) 490-8559 and we’ll tell you when a technician can be on site.
Is it cheaper to repair or replace an automatic gate operator?
Repair is usually cheaper when the fault is a component like a limit switch, loop detector, or remote receiver, typically $185 to $495. Replacement makes more sense when the motor itself has failed, the gear train is stripped, or the board is obsolete – pushing $700 to $1,800 for a new operator. We’ll show you both numbers in writing and let you decide without pressure.
Do you work on all automatic gate brands?
Our technicians are trained on nine gate-motor brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your operator is one of those, we carry or can source parts for it. If you’re not sure what brand is in the box, call (904) 490-8559 and read us the numbers off the housing – we’ll identify it before we dispatch.
Is a broken automatic gate dangerous to operate manually?
A gate with a failed drive belt or chain can be heavy and awkward to move by hand, and some swing gate systems have high-tension springs that store significant force. We do not recommend manually forcing a gate that won’t move on its own. Call (904) 490-8559 and a trained technician will handle it with the right tools and procedure.
Get Your Automatic Gate Fixed Today
Call Carver Gate Repair Jacksonville at (904) 490-8559 for a free estimate on automatic gate repair. A live person answers, every hour, every day. We’ll ask what the gate is doing, what brand the operator is, and get a technician scheduled. Written price before work starts. Written guarantee on every repair. Done right, or we make it right.
Written by Lonnie Burke, Owner at Carver Gate Repair Jacksonville, serving Jacksonville.