Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHinge & Post Repair in Jacksonville, FL
Hinge and post repair in Jacksonville typically runs $185 to $650 depending on whether we’re welding a split hinge, resetting a leaning post, or replacing rotted wood set in concrete. Most hinge failures we see across Jacksonville start small: a gate that drags, a sag you can see from the street, a post that shifted after a hard rain. Left alone, that sag turns into a snapped weld or a post that pulls clean out of the ground. Carver Gate Repair Jacksonville handles hinge and post work as a core repair, not an add-on. If you’re dealing with a gate that won’t swing right, call (904) 490-8559 and we’ll give you a written price before any work starts. This is the same crew that handles full Gate Repair in Jacksonville work, so we see hinge and post failures every week.
When You Need Hinge & Post Repair
Most homeowners catch the problem late. They notice the gate scrapes the driveway or sits crooked in the frame, but they don’t connect it to the hinge or the post until something breaks and they need Gate Repair. Here are the signs we tell people to watch for in Jacksonville:
- The gate drags or scrapes the ground on the latch side. That’s almost always a sagging hinge or a post that’s leaning out of plumb. In Jacksonville’s sandy soil, posts settle unevenly, and the gate follows.
- The gate sits visibly crooked in the opening. Stand back and look at the top rail. If it’s not level, the hinge side has moved. Waiting means the weight keeps working against the hinge until the weld or the bolt tears.
- A post wobbles when you push on it. A post should feel solid. If it moves at the base, the concrete footing has cracked or the post has rusted below grade. Jacksonville’s humidity and salt air accelerate that rust faster than people expect.
- The gate sticks or binds halfway through the swing. Hinge pins wear into an oval shape over time, and the gate rides up on the hinge instead of pivoting clean. You’ll hear it before you see it, a grind or a pop.
- You can see rust staining or flaking around the hinge barrel or post base. Surface rust is manageable. Deep rust that has eaten through the wall of the post or hinge is a structural problem that needs replacement, not paint.
- The gate hit something, a car, a trailer, a falling limb. Any impact can spring a hinge or crack a weld even if nothing looks broken at first glance. The damage shows up weeks later when the gate starts to droop.
Our Hinge & Post Repair Process
We work to The Garrison Standard, which means the process is the same on every job: show up when we say, diagnose before we quote, put the price in writing, and stand behind the work for a full year. Here’s how a hinge or post repair goes in Jacksonville:
- Inspection and load check. We look at the whole gate first, not just the broken hinge. That means checking the gate weight, the other hinge, the post footing, and the condition of the steel or wood. A hinge rarely fails alone.
- Written diagnosis and price. Before any work starts, you get a written price that covers the repair, the materials, and the labor. That number doesn’t change at the door. If we find something else once we open it up, we stop and show you before we go further.
- Repair or replacement of the hinge. For steel gates, that’s cutting out the old barrel or leaf, welding in the new hinge, and setting the gate level. For aluminum or ornamental gates, we match the hinge style and bolt pattern so the repair doesn’t look like a patch job.
- Post reset or replacement. If the post is the problem, we dig out the old footing, set the new post in concrete, and brace it while it cures. In sandy Jacksonville soil, we pour the footing deeper than the old one typically was, which is usually why it failed in the first place.
- Adjustment and swing test. Once the gate is hung, we run it through its full swing several times, check the latch alignment, and make sure the gate rests level. If the gate has an opener, we check the limit settings so the motor isn’t fighting the new hinge position.
- Cleanup and the written guarantee. We haul off the old hardware and post, sweep the work area, and hand you a written guarantee covering the repair for a full year. If it fails inside that window, the second visit is free. That’s the 365-Day Done Right Promise, and it’s not a verbal thing. It’s in writing.
Hinge & Post Repair Pricing in Jacksonville
Hinge and post repair in Jacksonville typically costs $185 to $650, with most jobs landing between $250 and $400 for a single hinge replacement on a standard residential gate. A full post reset in concrete runs higher because of the excavation and cure time. Here’s how the pricing breaks down:
- Single hinge replacement (steel gate, welded): $185 to $340. Includes cutting out the old hinge, welding the new one, and adjusting the gate level.
- Double hinge replacement: $320 to $550. Both hinges replaced so the gate hangs evenly instead of pivoting on one new and one worn hinge.
- Post reset in existing concrete (no replacement): $275 to $450. We dig out the old footing, re-set the post plumb, and pour new concrete.
- Full post replacement with new footing: $400 to $650. New steel post, deeper footing, concrete, and re-hanging the gate. Price varies with post size and whether the gate is steel, aluminum, or wood.
- Weld repair on a cracked hinge or post bracket: $150 to $285. When the hinge itself is fine but the weld has let go, this is the fix.
What moves the price: gate weight, post depth, whether the post is steel or wood, and whether the concrete around the old post has to be fully removed or can be re-used. Aluminum gates take different hardware than steel. Wood posts rot at ground level in Jacksonville’s wet summers and need a different approach entirely. Every quote is written before work starts, so you know the number before we touch the gate. Estimates are free. Call (904) 490-8559 and we’ll come out and look.
Hinge & Post Repair for Gate Motor Systems
When a hinge or post fails on a gate with an opener, the motor takes the hit, which is why Automatic Gate Repair often starts with the hardware. A sagging gate forces the operator to work harder, which burns out limit switches and strips gears faster than normal wear. We service openers from FAAC, BFT, Linear, and Viking, and the hinge work we do always accounts for how the motor is mounted. A post reset on a swing gate with a BFT articulating arm operator has to be dead plumb or the arm binds. A sliding gate with a Viking motor needs the track level and the post square, or the gate jerks through the travel. We check the opener after every hinge repair and adjust the travel limits so the motor isn’t pulling against the new geometry.
FAQs – Hinge & Post Repair
How much does hinge and post repair cost in Jacksonville?
Hinge and post repair in Jacksonville typically runs $185 to $650. A single welded hinge replacement on a standard residential steel gate is usually $185 to $340, while a full post replacement with a new concrete footing runs $400 to $650. The exact price depends on gate weight, post material, and whether the old footing can be reused. Call (904) 490-8559 for a written quote, estimates are free and the number doesn’t move once it’s in writing.
Can you fix a sagging gate the same day?
Yes, in most cases we can repair a sagging gate the same day. Hinge replacements and Weld & Rust Repair are typically done in one visit. A full post reset takes longer because the concrete needs time to cure before the gate is re-hung, but we can often brace the gate temporarily so it’s usable the same day. Call (904) 490-8559 and we’ll tell you what’s realistic for your specific gate before we schedule anything.
Is it cheaper to repair a hinge or replace the whole gate?
Repairing a hinge is almost always cheaper, usually $185 to $340 for a single hinge versus $1,500 to $4,000 or more for a new gate, so Lock Repair and hinge work saves you money. The exception is when the gate itself is rusted through in multiple places or the posts are both failing. In that case, putting new hinges on a failing frame is wasted money. We’ll tell you straight which situation you’re in, and the diagnosis costs you nothing.
Why did my gate post lean after a few years in Jacksonville?
Gate posts in Jacksonville lean most often because of shallow footings and sandy soil. The original installer may have set the post in a footer that was too small or too shallow, and Jacksonville’s rain cycles cause the soil to shift and the concrete to crack. Salt air near the beaches and the Intracoastal also rusts steel posts below grade. We set replacement posts deeper and wider than the original, which is the standard fix that keeps the post plumb for years instead of months.
If your gate is sagging, scraping, or leaning, don’t wait for the hinge to snap while the gate is open. Call Carver Gate Repair Jacksonville at (904) 490-8559. You’ll get a live person on the phone, a background-checked uniformed technician on site, a written price before work starts, and a written guarantee that covers the repair for a full year. That’s The Garrison Standard, and it applies to every hinge and post repair we do in Jacksonville.
Written by Lonnie Burke, Owner at Carver Gate Repair Jacksonville, serving Jacksonville.