Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Fleming Island, FL
Carver Gate Repair is the gate company Fleming Island homeowners call when a driveway gate stops opening, a motor burns out after a storm, or a builder-installed operator gives up for good. Most of our work here is on newer, custom estate homes with ornamental aluminum and steel gates, and the St. Johns River’s salt air means that rust, corroded rollers, and fried control boards are normal parts of the job, not rare exceptions. If you need a gate fixed, installed, or automated, call (904) 490-8559 and you’ll get a live person, not a voicemail.
Why Fleming Island Homes Are Different
Fleming Island is not a typical suburban grid. It’s mostly newer, upscale single-family homes and gated communities built since the 1990s, with long driveways, arched or decorative entryways, and gates that were custom-fitted to match the house rather than dropped in from a catalog. That matters when a hinge fails or a limit switch goes bad, because the replacement part usually has to match non-standard hardware, not just “close enough.”
The climate is the biggest variable we deal with. Humid subtropical air, summer thunderstorms, and salt carried inland from the Atlantic push oxidation into hinges, rollers, and operator electronics faster than homeowners expect. Afternoon downpours flood low-lying gate tracks and short out control boards, and high winds from summer storms can knock a heavy gate clean off its track. In the gated sections of Fleming Island Plantation especially, many custom iron gates were installed by the same builder and share the same undersized opener motors, so after a lightning storm we see clusters of the same failure, blow capacitor boards, strained motors, limit switches out of alignment, all in the same week. Lonnie Burke and our technicians keep spare boards and common Fleming Island hardware on the trucks for exactly that reason.
Styles & brands we work with
Our Main Fleming Island Services
The three calls we get most in Fleming Island are broken gates, dead motors, and full gate installs on new or remodeled properties. Each has its own page below, with local pricing and the conditions that change the job on this side of the river.
Gate Repair in Fleming Island
Gate repair in Fleming Island usually means a gate that won’t open, won’t close, or has slid off its track after a storm. Salt air works on hinges and rollers year-round, so a gate that opens fine in January can bind by July. We inspect the whole system, not just the visible break, because a bent hinge and a stripped gear often happen together here. Every repair gets a written price before work starts and a written guarantee good for a full year. If the repair fails inside that window, the second visit is free. Full details are on our Gate Repair in Fleming Island page.
Gate Installation in Fleming Island
Gate installation in Fleming Island usually means matching a new gate to an existing arched or decorative entryway on a newer estate home, or adding a driveway gate where there wasn’t one. We measure, order, and schedule deliberately, because the wrong gate on a Fleming Island driveway looks wrong and wears wrong. The humid, salt-tinged air means material choice matters, and we spec hardware that holds up to it. A Gate Installation in Fleming Island starts with a free measure and a written price, never a guess. Full scope and timeline are on that page.
Gate Motor Repair in Fleming Island
Gate motor repair in Fleming Island is frequently a control board that failed after a lightning storm or an opener motor that was undersized for the gate it runs, common in Fleming Island Plantation. Excess moisture works into the electronics over time, so corrosion on terminals and relays is a regular find. We service FAAC, BFT, Linear, Viking, LiftMaster, and the other major brands, and we match the replacement to the system already installed so the gate runs within its rated load. Written price first, guarantee after. The full run-down is on our Gate Motor Repair in Fleming Island page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Fleming Island
Our Fleming Island trucks carry parts for FAAC, BFT, Linear, and Viking operators, along with the other major brands in our fleet. We stock common capacitor boards, limit switches, and photo eyes locally so most motor repairs can be completed the same day, not after a parts-order wait. See our brands for the full list and what each system typically costs to repair.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Fleming Island, FL
| Service | Typical range in Fleming Island |
|---|---|
| Gate repair, standard (hinge, roller, track realignment) | $95 – $290 |
| Gate repair, heavy or welded steel (in place) | $180 – $420 |
| Gate opener / motor repair (control board, capacitor, limit switch) | $110 – $340 |
| Gate opener / motor replacement | $380 – $850 |
| Full gate installation, single aluminum driveway gate with opener | $1,900 – $4,500 |
| Full gate installation, custom steel or ornamental iron | $3,500 – $7,800 |
| Gate motor / operator only, installed | $750 – $1,600 |
| Post replacement or reinforcement (single gate post, set in concrete) | $380 – $950 |
| Track replacement, cantilever or rolling gate, per 10 ft section | $300 – $700 |
| Hinge or roller replacement, welded, heavy gate | $220 – $500 |
| Gate automation / access control add-on (keypad, remote, loop detector) | $400 – $1,200 |
In Fleming Island, the price of a repair often climbs when salt corrosion has spread past the visible part, so you’re replacing a hinge bracket and a roller instead of just a hinge. The number we quote is the number you pay, every quote is written, delivered before any work starts, and it does not move at the door.
Neighborhoods We Serve in Fleming Island
We dispatch throughout Fleming Island and typically reach most homes within 60 to 90 minutes of the call. The areas we service most include:
- Fleming Island Plantation
- Eagle Harbor
- Pace Island
- Orange Park South
- Black Creek
Service Area – Cities Near Fleming Island
Our Fleming Island crews also handle gate work in the surrounding Clay County and Duval County communities. If you’re in Orange Park, FL, Middleburg, FL, Jacksonville, FL, or Ponte Vedra Beach, FL, the same written-price, written-guarantee standard applies. One call to (904) 490-8559 covers the whole area.
Serving Fleming Island, FL - Our Local Coverage Area
We’re based in the Fleming Island area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Fleming Island
Most Fleming Island calls are reached in 60 to 90 minutes. Repairs that need a stocked board or hinge can usually be completed the same day; full installs and custom gate orders are scheduled after a free on-site measure. Call (904) 490-8559 and a live person will tell you exactly what to expect.
Many Fleming Island communities, including Fleming Island Plantation, have architectural review requirements for new gates and even for visible changes to existing gate hardware. You’ll want to check your community’s rules before scheduling, and we can provide the technical specs your board or management company asks for.
No. Estimates are free, including new gate measures and motor replacements. We quote a written price before any work begins, and the price you approve is the price on the invoice. No line items get added mid-job. Call (904) 490-8559 to set it up.
If your gate is down, call Carver Gate Repair at (904) 490-8559. A live person answers, every time, and your quote is free whether you book the job or not.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fleming Island Customers Say
"Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F."Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T."Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A.