Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Macclenny, FL
Gate work in Macclenny runs on different rules than it does closer to Jacksonville. Long driveway gates set back from County Road 125 or 228, solar-powered openers, sandy soil around gate posts, and afternoon thunderstorms that roll through Baker County several times a week in summer all change what a gate company has to get right. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems, and every job in Macclenny starts with a written price before any work begins. If you need a repair, replacement, or motor service on your gate, call (904) 490-8559 and you’ll speak to a live person, not a voicemail box.
Why Macclenny Homes Are Different
Macclenny’s housing stock is a mix of older slab-on-grade ranch homes in town, manufactured homes on multi-acre lots off Sandy Ford Road and Mud Lake Road, and new subdivisions pushing north toward the I-10 corridor. That spread means we see three different gate situations on a regular basis: short walk gates on wood posts that have been in the ground since the 1980s, heavy steel driveway gates mounted on posts set in sandy soil, and solar-powered gates on rural acreage with no grid power run to the gate line.
The soil matters. Baker County sits on sandy loam that drains fast but shifts under load, especially after the heavy rain that hits Macclenny in summer. Wood posts rot at the base from humidity, metal posts lean as the sand gives way, and gates that were square when they were hung start dragging or binding at the latch. A gate that scrapes the ground or won’t close cleanly is usually a post issue, not just a hinge issue. We address that in how we reset and reinforce posts on Macclenny jobs.
The other piece is weather. Macclenny’s flat terrain leaves gates fully exposed to wind gusts during storm season, and the heat and humidity accelerate rust on rollers, hinges, and motor housings. Wood gates swell with moisture and stick in their frames. We specify corrosion-resistant hardware and weather-sealed electrical components on Macclenny installations for this reason, not as an upgrade but as standard practice.
Styles & brands we work with
Our Main Macclenny Services
Most calls from Macclenny homeowners fall into two buckets: a gate that will not open or close properly, and an opener that stopped working after a storm. The three services below cover the full range of what we do in Macclenny.
Gate Repair in Macclenny
A sagging gate, a latch that will not catch, a wheel that left the track, a hinge that snapped off a rotted post. Repair work in Macclenny usually comes down to hardware and posts, and we always check both before quoting. On rural properties, we also see chain-link gates that have been hit by farm equipment or have pulled loose from their post clamps. We write the price before touching the gate, and the repair is covered by our 365-Day Done Right Promise in writing. Gate Repair in Macclenny.
Gate Installation in Macclenny
New gate installation in Macclenny means choosing the right material for the conditions: steel or aluminum for durability against the humidity, and a gate weight that matches the opener you have or the opener you are adding. We also take post depth and soil into account, because sandy Baker County soil needs deeper-set posts and, on heavy gates, concrete collars to keep the gate square over time. Every MACCLENNY installation includes a free measure, a written price, and a full-year written guarantee. Gate Installation in Macclenny.
Gate Motor Repair in Macclenny
Automatic openers on Macclenny property fail most often after power surges from lightning strikes, which are common here. We replace burned control boards, failed limit switches, and loop detectors, and we check surge protection as part of the diagnosis on every motor call. We stock parts for nine major brands, including FAAC, BFT, Linear, and Viking, so we do not have to order and re-schedule on most Macclenny motor repairs. Gate Motor Repair in Macclenny.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Macclenny
We service and repair LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule openers in Macclenny. The right parts and the right know-how matter more than the brand name on the box. See our brands for the full list of systems our technicians are trained on.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Macclenny, FL
| Service | Typical range in Macclenny |
|---|---|
| Gate repair – standard service call | $75 – $140 |
| Gate hardware repair (hinges, rollers, latch) | $125 – $300 |
| Gate opener motor replacement | $450 – $1,200 |
| Control board replacement | $250 – $450 |
| Limit switch replacement | $120 – $220 |
| Loop detector replacement | $180 – $350 |
| Solar panel and battery replacement | $250 – $600 |
| Gate post reset and reinforcement | $200 – $500 |
| New gate installation (single driveway gate) | $1,500 – $4,500 |
| New gate and opener package | $3,000 – $7,500 |
Prices in Macclenny push higher when a post needs concrete reinforcement in sandy soil, when the gate sits far back from the road and requires extra travel time, or when surge damage has taken out a control board. Whatever the job, the price we quote is written down and agreed before any work starts, and it does not move at the door.
Neighborhoods We Serve in Macclenny
We serve the full Macclenny area, including the neighborhoods below. Most calls get a same-day or next-day response depending on parts availability, and we coordinate rural calls off the main roads with a specific arrival window so you are not waiting around.
- Downtown Macclenny
- Glen St. Mary area
- Sandy Ford Road corridor
- Mud Lake Road area
- Macclenny North / I-10 corridor
Service Area – Cities Near Macclenny
Macclenny sits at the west edge of the Jacksonville metro, and we regularly cross the county line for gate work in Middleburg, FL to the southeast and Orange Park, FL further south. Homeowners from Jacksonville, FL and Fleming Island, FL also call us for gate repair, installation, and motor work across the wider service area.
Serving Macclenny, FL - Our Local Coverage Area
We’re based in the Macclenny area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Macclenny
Most Macclenny repair calls are scheduled same-day or next-day depending on parts availability. Rural properties farther off the main roads get a specific arrival window rather than a vague “sometime today.” Call (904) 490-8559 and we will give you a real time.
Most gate repairs and replacements do not require a Baker County permit, but new driveway gates on some subdivision lots may need HOA review before installation. We can tell you what to check for your property, and we always write the price before starting.
Surge damage is the most common cause of opener failure in Macclenny. We recommend surge protectors and backup batteries as standard practice on every motor we service or install here. If your opener is dead after a storm, call (904) 490-8559 for a diagnosis and written quote.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Macclenny Customers Say
"Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H."Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P."Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F.