Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterPedestrian Gate in Jacksonville, FL
A pedestrian gate is a separate, person-sized entry built alongside or within a larger driveway gate. It lets people walk through without opening the full vehicle gate every time, which reduces wear on the motor and keeps foot traffic off the driveway. Carver Gate Repair Jacksonville installs and services pedestrian gates across Duval County, from Riverside and Avondale to Mandarin, San Marco, and the beaches. If you’re planning a driveway gate and want a matching walk-through entry, or if you already have a pedestrian gate that’s sagging, sticking, or hard to latch, call us at (904) 490-8559. We build and repair these gates as part of our Gate Installation work, and we treat them with the same written-price, written-guarantee standard as every full-size gate we touch.
Most pedestrian gates in Jacksonville are built from aluminum, steel, or wrought iron, and they’re usually matched to the style of the driveway gate they sit next to. What we see often in this market is a pedestrian gate that was added as an afterthought by a general contractor, with a cheap latch and no real post footing. Six months later it’s dragging on the concrete. That’s the kind of problem we fix properly, and it’s the reason we handle pedestrian gate work as its own job, not a side note.
When You Need Pedestrian Gate
Here are the situations we see most often in Jacksonville, and the ones that tell us a pedestrian gate needs real attention:
- You’re installing a new driveway gate and want a walk-through entry. A pedestrian gate keeps kids, delivery drivers, and guests from waiting on the big gate to cycle open. It also saves hundreds of motor cycles per year on your operator.
- Your existing pedestrian gate drags on the ground. In Jacksonville’s sandy, shifting soil, post movement is common. A gate that scrapes is usually a post that’s leaning or a hinge that’s worn past adjustment.
- The latch doesn’t catch or the gate swings open on its own. A gate that won’t stay closed is a security problem and a liability. We see this a lot on gates facing the Intracoastal side of town, where wind loads are higher.
- You’re adding a pool barrier or side-yard access. Jacksonville code requires pools to be separated by a self-closing, self-latching barrier. A properly built pedestrian gate is often the cleanest way to meet that requirement.
- The gate frame is rusted through at the bottom rail. Coastal air and irrigation overspray eat metal fast. If the bottom rail is compromised, a new gate is usually cheaper than trying to weld patches into rusted material.
- The gate post is loose in the ground. A gate that wobbles at the post needs the post reset in concrete, not just tightened hardware. We do this with a proper footing, the same way we set posts on new installs.
Our Pedestrian Gate Process
Pedestrian gate work follows the same sequence every time, whether it’s a new install in a St. Johns County subdivision or a repair on an older home in Murray Hill. It’s a defined process, and it starts with a written number before any work begins.
- Measure and assess the opening. We check the existing posts, the swing direction, the ground slope, and the style of the adjacent driveway gate. If it’s a repair, we identify exactly what failed and why, so we’re not putting a band-aid on a structural problem.
- Deliver a written price. Before we start, you get the full job price in writing. That includes materials, labor, hardware, and any post-setting or concrete work. The number doesn’t move once we start, because that’s The Garrison Standard, and it’s been the rule since 2008.
- Set or reset the posts. For new gates, we dig and pour proper footings below the frost and root zone, sized for Jacksonville’s sandy soil. For repairs, we pull the old post, clean the hole, and set a new one in fresh concrete. Most post-set jobs need a full day or two of cure time before the gate goes on.
- Mount the gate and hardware. We hang the gate with adjustable hinges rated for the gate’s weight, then set the latch, the closer (if required for pool code), and any lock hardware. Every screw and bolt gets anti-seize so it doesn’t lock up in our salt air.
- Adjust, test, and clean up. We open and close the gate at least twenty times, checking swing, latch engagement, and clearance. Then we sweep the site and leave it cleaner than we found it. You’ll get a walkthrough before we call the job done.
Every pedestrian gate job carries our 365-Day Done Right Promise in writing. If something isn’t done right within the first year, we come back and make it right at no charge, no argument. That’s not a sales line. It’s the guarantee that’s printed on every repair and install we do.
Pedestrian Gate Pricing in Jacksonville
Pedestrian gate pricing in Jacksonville varies by material, gate width, and what’s already in the ground. Based on our work across Duval and northern St. Johns counties, here are the ranges you should expect:
- Aluminum pedestrian gate, standard 48-inch width: $900 to $1,800 installed, depending on style and whether a new post and footing are needed.
- Steel or wrought iron pedestrian gate: $1,200 to $2,600 installed. Heavier material costs more, but it resists wind and impact better on wide-open lots.
- Gate only, no post work: $400 to $1,100, if the existing posts are square and solid and we’re just swapping the gate leaf.
- Post reset or new post with concrete footing: $350 to $700 per post, including concrete, hardware, and cleanup.
- Latch, hinge, or closer replacement only: $150 to $450, depending on the hardware and the gate’s weight.
- Full pedestrian gate replacement matching an existing driveway gate: $1,800 to $3,400, when we’re matching an ornamental pattern or a specific powder-coat color.
What moves the price in Jacksonville specifically: lot conditions (sandy soil near the coast usually means deeper footings), whether the gate has to meet pool-code requirements (self-closing and self-latching hardware adds cost), and how much the adjacent driveway gate costs to install. A plain aluminum model costs less than an ornamental steel gate with a matching arched top.
We don’t quote over the phone without seeing the opening, because a four-foot gate and a six-foot gate with a bad post are different jobs. What we do guarantee is this: the written price we give you before work starts is the price you pay. No surprise line items, no moving numbers. Call (904) 490-8559 and we’ll schedule a time to look at your gate. The estimate is free.
FAQs – Pedestrian Gate
How much does a pedestrian gate cost in Jacksonville?
A pedestrian gate in Jacksonville typically costs $900 to $3,400 installed, depending on material, width, and whether a new post and concrete footing are required. Simple aluminum gates start around $900; matching ornamental steel gates run higher. Call (904) 490-8559 for a free on-site estimate with a written price before any work starts.
Can you match my pedestrian gate to my existing driveway gate?
Yes, we match pedestrian gates to existing driveway gates regularly. We work with steel, aluminum, and wrought iron, and we can match common ornamental patterns, top styles, and powder-coat colors. If your driveway gate came from a specific manufacturer, we’ll match the design as closely as the material allows. Bring us a photo or let us come see the gate and we’ll tell you exactly what’s possible and what it will cost.
Do pedestrian gates in Jacksonville need to meet pool code?
If the pedestrian gate provides access to a pool area, yes. Jacksonville pool codes require the gate to be self-closing and self-latching, with the latch positioned high enough that small children can’t reach it. We install code-compliant spring hinges and latches, and we’ll tell you during the estimate if your gate needs updating. This applies to most homes in Riverside, Ortega, and anywhere with a backyard pool.
How long does a pedestrian gate installation take?
Most pedestrian gate installations take one day for the gate itself, plus one to two days of concrete cure time if we’re setting new posts. Repairs like latch and hinge replacement are usually done in under two hours. We’ll give you a clear timeline in the written quote before we start. If you need it faster, call (904) 490-8559 and ask about our current schedule. We answer the phone around the clock.
Why Jacksonville Homeowners Choose Carver Gate Repair
Lonnie Burke runs the Carver Gate Repair Jacksonville location, and he’s held the same line since taking it over: a background-checked, uniformed technician shows up on time, the written price you’re given is the price you pay, and the work carries a full-year guarantee. We don’t ask you to trust that. We put it in writing, because that’s The Garrison Standard, and it’s been the rule for every location since 2008.
We work on pedestrian gates and the motors and hardware that run alongside them across nine brands, including FAAC, BFT, and Linear. That matters less for a simple manual pedestrian gate, but if yours is tied into an intercom, an access keypad, or a Viking opener, you want a technician who knows the whole system, not just the hinge side. We fix the gate, and we make sure it works with the rest of your entry setup.
If you’re looking for a pedestrian gate in Jacksonville, start with a call to (904) 490-8559. We’ll schedule a visit, give you a written price, and treat your walk gate with the same care we give every driveway gate we install. For a broader look at what’s involved, see our Gate Installation in Jacksonville page. And if you’re just starting your research, head back to our home page to see the full range of gate work we handle.
Written by Lonnie Burke, Owner at Carver Gate Repair Jacksonville, serving Jacksonville.