Sliding driveway gates
Wrought iron
Wood & steel frame
Farm & ranch
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterDriveway Gate in Jacksonville, FL
Driveway gate installation in Jacksonville typically runs $4,800 to $14,500, with the final number set by gate material, width, automation, and site prep. Most installations take one to two days once the gate and operator are on site. Carver Gate Repair Jacksonville offers Gate Installation services for driveway gates across Duval County, and every job starts with a written price before any work begins.
We’re the gate arm of the Garrison Partners family, operating to The Garrison Standard since 2008. If you’re planning a driveway gate for a Riverside historic home, a Mandarin corner lot, a new-build in Bartram Park, or acreage off Heckscher Drive, this page covers what to expect. For the broader picture on what goes into a project like this, see our Gate Installation in Jacksonville page. When you’re ready to talk specifics, call (904) 490-8559 and you’ll get a live person, day or night.
When You Need Driveway Gate
A driveway gate isn’t a routine purchase. These are the situations where Jacksonville homeowners call us:
- You want to control who gets onto the property. Long driveways off Atlantic Boulevard, San Jose Boulevard, or back lanes in San Marco leave a house exposed. A driveway gate puts a physical stop at the property line instead of at the front door.
- Your current gate is a manual swing gate and you’re tired of it. Getting out in the rain during a summer afternoon storm to open a gate gets old fast. Automation turns a manual gate into something you open from the car.
- Kids, dogs, or pool safety. Homes in areas like Julington Creek and Ortega with young children or pets often install driveway gates to keep the driveway from being a straight run to the road.
- A previous contractor installed a gate that leans, sags, or won’t close square. We rebuild or rehang gates on new posts and hinges. A gate that drags on the ground in the summer or binds after heavy rain is a post or hinge problem, and it’s fixable.
- You’re replacing an older gate and operator together. Mixing a new motor with an old, rusted frame usually means paying for two service calls later. Replacing both at once gets you a matched system and one warranty period.
Our Driveway Gate Process
The process is straightforward and follows The Garrison Code on every job: show up squared away, give a written price, do the work clean, and stand behind it. Here’s how a typical driveway gate installation runs:
- Call and site assessment. You reach a live person at (904) 490-8559. We talk through what you have, what you want, and schedule a visit. No gate job is quoted over the phone without seeing the drive, the grade, and the existing setup.
- On-site walkthrough and measurements. A background-checked, uniformed technician measures the driveway opening, checks grade and drainage, marks post locations, and talks through gate style options that fit the site. This is where we catch things like slope, utilities, and turning radius before they become change orders.
- Written price before any work starts. You get a hard number covering gate, operator, posts, mounting, and labor. The number does not move once work begins. If the site reveals something unexpected mid-install, we stop, explain it in plain terms, and get written approval before proceeding.
- Installation and automation. We set posts in concrete, hang the gate, level it to swing or slide true, and mount the operator. Technicians are trained on FAAC, BFT, Linear, and Viking equipment, plus five other motor brands, so the operator matches the gate weight and duty cycle, not whatever is on the truck.
- Setup, testing, and site cleanup. We set travel limits, adjust force settings, test obstruction reversal, and walk you through keypad, remote, and safety sensor use. The gate is cycled repeatedly while you watch. We leave the site clean and take scrap material with us.
How Much Does a Driveway Gate Cost in Jacksonville?
Driveway gate installation in Jacksonville typically falls in these ranges, including the gate, operator, posts, and labor:
| Gate Type | Typical Installed Range (Jacksonville) |
|---|---|
| Single swing gate, steel or aluminum, manual | $4,800 – $8,000 |
| Single swing gate with automation | $6,500 – $10,500 |
| Double swing gate with automation | $9,000 – $14,500 |
| Sliding driveway gate with automation | $7,500 – $13,000 |
| Solar-powered operator upgrade | $400 – $900 |
What moves the number in Jacksonville:
- Gate material and style. Aluminum is lighter and resists the salt air near the beaches and the Intracoastal better than raw steel. Steel is heavier and stronger but needs a proper finish to hold up in a humid, coastal climate. Decorative styles with scrollwork or full privacy panels add fabrication cost.
- Opening width and gate weight. A 12-foot single drive gate is simpler than a 20-foot double gate. Wider openings mean stronger operators, heavier posts, and sometimes a V-track or cantilever system for sliders.
- Ground conditions and grade. Sandy soil in parts of the Westside and Arlington sets posts differently than hard clay in Mandarin. If the driveway slopes toward the street, drainage work at the gate area may be needed so the gate doesn’t sit in standing water after a storm.
- Electrical run and automation extras. Running conduit and wiring from the house to the gate is a line item. Keypads, intercoms, vehicle loop detectors, and battery backup each add to the total. We use loop detectors where a driveway needs to hold a gate open for a turning vehicle, a detail that matters on busy roads like Hendricks Avenue or Baymeadows Road.
- Permit requirements. Duval County and the City of Jacksonville require permits for most electrical work tied to gate operators, and some neighborhoods in Ortega, Avondale, and Riverside have historic district review layers. We handle the permit paperwork and coordinate the inspection.
Every installation gets a written price before work starts. That’s the number you pay, not an estimate that grows once the old gate is on the ground. Call (904) 490-8559 for a free site assessment and exact quote.
Why Jacksonville Homeowners Choose Carver for Driveway Gates
We’ve been part of the Garrison Partners family since 2008, and every Carver location runs to The Garrison Standard. What that means for a driveway gate project:
- 365-Day Done Right Promise. If the gate installation or any part of it isn’t right, we make it right. The guarantee is in writing and covers a full year from the date of service. If something fails inside that window, the second visit is free. No charge, no argument.
- Written price before work starts. You know the number before we dig the first post hole. No moving prices at the door.
- Background-checked, uniformed technicians. The person at your gate is the person we would send to our own home. You know who you’re letting onto the property.
- Phones answered by a live person, 24/7. Gate stuck at 10 p.m.? You won’t get a voicemail box. A real person answers, including weekends and holidays.
- Nine gate-motor brands covered. Our technicians are trained on FAAC, BFT, Linear, Viking, LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. The operator gets matched to the gate, not the other way around.
Brands We Install and Automate
We regularly install and service driveway gates with FAAC and BFT hydraulic and electromechanical swing operators, which are common on heavier estate gates in neighborhoods like Queens Harbour and Pablo Bay. For lighter residential gates, Linear and Viking operators offer solid value and reliable cycle counts. We stock parts for all four, which means fewer trips back and forth to the supply house and shorter project timelines.
FAQs – Driveway Gate
How much does a driveway gate cost in Jacksonville?
A driveway gate installation in Jacksonville runs $4,800 to $14,500 depending on gate type, width, automation, and site conditions-see our full breakdown of How Much Does Gate Installation Cost? (2026 Price Guide) - Jacksonville, FL for details. Single swing gates with automation start around $6,500, while double swing gates with automation run $9,000 to $14,500. Call (904) 490-8559 for a free on-site quote with a written price before work starts.
How long does driveway gate installation take?
Most driveway gate installations in Jacksonville take one to two days on site once the gate and operator are delivered. Simple single-gate jobs on flat ground can finish in a day. Double gates, sliding gates, or jobs requiring significant electrical trenching run two days. We give you a firm timeframe in writing before the project starts.
Do I need a permit for a driveway gate in Jacksonville?
Yes, most automated driveway gate installations in Jacksonville require an electrical permit from the City of Jacksonville or Duval County, and some neighborhoods in historic districts like Riverside and Avondale add their own review layer. Carver handles the permit application, scheduling, and inspection coordination as part of the installation.
Can you install a driveway gate that matches my existing fence?
We can build a driveway gate or Pedestrian Gate in steel or aluminum to match most fence styles in Jacksonville, including aluminum panel fences, wrought-iron style, and board-on-board wood. Where exact matching isn’t possible, we match the height, color, and picket spacing so the gate reads as part of the fence line. Bring a photo or a sample and we’ll work from it.
Is it cheaper to repair or replace a driveway gate?
It depends on what’s wrong. A sagging gate on solid posts is usually a hinge or hardware repair in the $200 to $600 range. A rusted-through frame, failed welds, or posts that have rotted at the base usually means replacement, because new hardware won’t fix a structure that’s already gone. We’ll tell you straight which one you need and put the recommendation in writing before any work starts.
Get a Written Price for Your Driveway Gate in Jacksonville
A driveway gate is a real investment, and the difference between a good installation and a bad one shows up in the first year. Hang it wrong and every rainstorm in a Jacksonville summer tests it. Hang it right and it cycles reliably for a decade.
Call (904) 490-8559 to schedule a free site assessment. A live person answers, we’ll talk through your driveway, your gate style, and your operator options, and you’ll get a written price before any work begins. All our technicians are background-checked and uniformed, and every driveway gate installation carries the 365-Day Done Right Promise in writing.
Ready to see what a driveway gate does for your property? Call Carver Gate Repair Jacksonville today.
Written by Lonnie Burke, Owner at Carver Gate Repair Jacksonville, serving Jacksonville.